Brushed Aluminum, was produced through special treatment based on the bare aluminum, has a special effect of aluminum colors, makes the products essential and modern feelings.
Mirror Aluminum, was anodized from the bare aluminum, has a very high glossy surface and high refection rate. Compare with the gloss materials, this product is easy for processing and make to different shapes.
As the leader of the aluminum composite panel industry, and with a profound knowledge of the market demand, Pivot keeps on researching and innovating to bring out products that have won recognition all around the world for their high quality, diversification, high technological content, and environmental protection.
We provide our customers with qualified aluminum composite panels and with an overall professional systematic service of engineering and construction.
| Product Features: |
| 1. Weather resistance: the extra-strong weather and ultraviolet resistance and good acid and alkali resistance can stand test of severe environment. Long duration of color and gross, service life can be over 15 years, applicable temperature: -40℃-+80℃；Peeling strength exceeds that of the national standard. 2. Economical: a variety of quality coatings are applied on the product, which allows no forming of dirt on the surface and makes it self-cleaning with natural rain water, free from expenses on maintenance of high rise large buildings. 3. Ease of application:AC panels are easy to cut, crop, plough, bend into various shapes, and fully satisfies the needs in decoration and design of various moulds. 4. Fire-resistance: the outer aluminum-foil layer of the aluminum composite panel can obstruct heat transmission at the initial stage of combustion to protect the polyethylene core, the fire-resistance of which meets the national standard. 5. Light weight: the aluminum composite panel is compounded of aluminum alloy and quality plastic. Its weight is lighter than other decorative materials, so it reduces the dead load of the material for the convenience of construction and thus has considerably shortened the construction period. 6. Comparison on thickness and weight under the same rigidity ibond compared with aluminum single plate
8. Environmental protection: good oxidation, no change on the surface layer, no pollution to the environment, resistance to contamination of the extraneous acid, solvent and detergent, making it not easy for them to stick to the surface. |
9. Color diversity: We offer more than 50 colors for the choice of our customers, and we also custom special colors at the request of our customers.
The above diagram shows the wind load and the maximum length permitted under specific panel width. (no need to set the panel length of the reinforcing rib) Permissible stress: 53 n/mm2 (including safe factor) value applicable for the panel simply supported on four sides Please inquire our professional staff for other techniques on installation system.
|
| Raw Material | Product Specifications | ||||||||
|
|
| ■ physical properties of ibond aluminum composite advertising panel |
| Test items | criterion | result | |
| Unit weight | ASTM D792 | T3mm=3.8kg/m2 | |
| Thermal expansion coefficient | ASTM D696 | 24-28 | |
| Heat distortion temperature | ASTM D648 | 115℃ | |
| Thermal conductivity | ASTM 976 | 0.102kcal/m.hr℃ | |
| Flexure rigidity | ASTM C393 | 14.0*10∧5 | |
| Through resistance | ASTM D732 | 1.640 kgf | |
| Adhesive strength | ASTM D903 | 0.77kg/mm | |
| Bendability | ASTM D790 | 4032kg/mm2 | |
| Shear resistance | ASTM D732 | 2.7kgf/mm2 |
| Technical data sheet for ibond aluminum composite advertising panel | ||||||
| Product thickness | Unit | 2mm | 3mm | 4mm | 6mm | |
|
Front and back weight of the aluminum panel |
(mm) | 0.30 | ||||
| (kg/m2) | 2.90 | 3.80 | 4.75 | 6.60 | ||
| Mechanical properties of the product | ||||||
|
Section modulus W |
(cm3/m) (KNcm3/m) |
0.51 345 |
0.81 865 |
1.11 1620 |
1.70 3840 |
|
| Elastic modulus of the sectional E material of aluminum panel Panel tensile strength 0.2% yield stress Extensibility Linear thermal expansion of the aluminum product Thermal performance |
(N/mm2) (N/mm2) (N/mm2) (%) |
Rm:145-185 Rp0,2: 110 - 175 A50>3% 2. 0mm/m (100. Ctemperature difference） |
||||
| Thermalresistance R Heat transmission coefficient V |
(m2K/m) (w/m2k) oC |
0.0047 5.72 |
0.0080 5.61 |
0.0113 5.50 |
0.0180 5.30 |
|
| Heat resistance temperature | -50～+80 | |||||
Product Data Sheet
| I.BOND(architecture) | I.BOND(advertising) | I.BOND(digital) | |||||||||||||
| Panel Thickness | Standard | Unit | 3mm | 4mm | 6mm | 2mm | 3mm | 4mm | 6mm | 2mm | 3mm | 4mm | 6mm | ||
| Thickness of Aluminium | DIN 1784 | mm | 0.5 | 0.5 | 0.5 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | ||
| Aluminum thickness deviation | DIN 1784 | mm | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ||
| Weight | Kg/m2 | 4.65 | 5.63 | 7.42 | 2.92 | 3.85 | 4.76 | 6.75 | 2.92 | 3.85 | 4.76 | 6.75 | |||
| Tolerance in length | DIN 16927 / ISO 11833-1 | mm | - 1 / +3 | - 01/ +3 | - 01/ +3 | - 0 / +2 | - 0 / +2 | - 0 / +2 | - 0 / +2 | - 0 / +2 | - 0 / +2 | - 0 / +2 | - 0 / +2 | ||
| Tolerance in width | DIN 16927 / ISO 11833-1 | mm | - 1 / +1.5 | - 1 / +1.5 | - 1 / +1.5 | - 0 / +1.5 | - 0 / +1.5 | - 0 / +1.5 | - 0 / +1.5 | - 0 / +1.5 | - 0 / +1.5 | - 0 / +1.5 | - 0 / +1.5 | ||
| Tolerance in thickness | DIN 16927 / ISO 11833-1 | mm | ± 0.15 | ± 0.15 | ± 0.15 | ± 0.15 | ± 0.10 | ± 0.10 | ± 0.15 | ± 0.15 | ± 0.10 | ± 0.10 | ± 0.15 | ||
| Horizontal flatness | DIN ISO 1101 | mm | 6 | 5 | 5 | 6 | 5 | 4 | 4 | 5 | 3 | 3 | 3 | ||
| Longitudinal roughness | DIN ISO 1101 | mm | 7 | 6 | 6 | 7 | 6 | 6 | 5 | 6 | 5 | 5 | 5 | ||
| Technical Properties | |||||||||||||||
| Section Modulus W | DIN 53293 | cm3/m | 1.25 | 1.75 | 2.75 | 1.01 | 1.25 | 1.75 | 2.75 | 1.32 | 1.55 | 1.85 | 2.96 | ||
| Rigidity (Poisson’s ratio μ = 0.3) E.I | DIN 53293 | kNm2/m | 0.14 | 0.28 | 0.63 | 0.67 | 0.14 | 0.28 | 0.63 | 0.97 | 0.16 | 0.34 | 0.86 | ||
| Alloy | EN 573-3 | ENAW | 1100 | 1100 | 3003 | ||||||||||
| Temper of Cover Sheets | EN 515 | H16/H18 | H16/H18 | H46/H42 | |||||||||||
| Modulus of Elasticity | EN 1999 1-1 | N/mm2 | 70,000 | 70,000 | 70,000 | ||||||||||
| Tensile Strength of Aluminium | EN 485-2 | N/mm2 | Rm ≥ 145 | Rm ≥ 145 | Rm ≥ 175 | ||||||||||
| 0.2% Proof Stress | EN 485-2 | N/mm2 | Rp0.2 ≥ 90 | Rp0.2 ≥ 90 | Rp0.2 ≥ 90 | ||||||||||
| Elongation | EN 485-2 | % | A50 ≥ 3 | A50 ≥ 3 | A50 ≥ 2 | ||||||||||
| Linear Thermal Expansion | EN 1999 1-1 | mm/m/℃ | 0.002 at 100℃ Temp difference | 0.020 at 100℃ Temp difference | 0.015 at 100℃ Temp difference | ||||||||||
| Core | |||||||||||||||
| Polyethylene, Typ LD-PE | g/cm3 | 0.935 | 0.935 | 0.935 | |||||||||||
| Surface | Coil Coating | Coil Coating | Coil Coating | ||||||||||||
| Lacquering | Fluorocarbon based (PVdF) | Fluorocarbon based (PE) | Fluorocarbon based (PE) | ||||||||||||
| Thickness of coating | µm | two coating：≥26，three coating:≥32 | ≥16 | ≥16 | ≥16 | ≥16 | ≥19 | ≥19 | ≥19 | ≥19 | |||||
| Gloss (initial value) | ECCA T2 | % | 30 - 80 | 20 - 100 | 20 - 100 | ||||||||||
| Pencil Hardness | ECCA T4 | H | 2H | 2H | |||||||||||
| Acoustical Properties | |||||||||||||||
| Sound Absorption Factor άs | ISO 354 | 0.05 | 0.05 | 0.05 | |||||||||||
| Sound Transmission Loss RW | ISO 717-1 | DB | 25 | 26 | 28 | 23 | 25 | 26 | 28 | 23 | 25 | 26 | 28 | ||
| Loss Factor d | EN ISO 6721 | 0.0072 | 0.0087 | 0.0138 | 0.0062 | 0.0072 | 0.0087 | 0.0138 | 0.0062 | 0.0072 | 0.0087 | 0.0138 | |||
| Thermal Properties | |||||||||||||||
| Thermal Resistance R | DIN 52612 | m2K/W | 0.0069 | 0.0103 | 0.0172 | 0.0036 | 0.0069 | 0.0103 | 0.0172 | 0.0036 | 0.0069 | 0.0103 | 0.0172 | ||
| Heat Transition Coefficient U | DIN 4108 | W/m2K | 5.65 | 5.54 | 5.34 | 5.98 | 5.65 | 5.54 | 5.34 | 5.98 | 5.65 | 5.54 | 5.34 | ||
| Temperature Range | ℃ | -50…+80 | -50…+80 | -50…+80 | |||||||||||
